Omron VARISPEED L7 User Manual

5-45
5
 Digital Operator/LED Monitor Parameters: o
Monitor Selections: o1
Para-
meter
Num-
ber
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
MEMO-
BUS
Register
Page
V/f
Open
Loop
Vector
Closed
Loop
Vector
Closed
Loop
Vector
(PM)
Display
o1-01
Monitor selection
Set the number of the 4rd. moni-
tor item to be displayed in the
Drive Mode. (U1-)
(On LED operator JVOP-161
only.)
4 to 56
6Yes
AA A -
500H 6-64
User Monitor Sel 4 to 75 - - - A
o1-02
Monitor selection
after power up
Sets the monitor item to be dis-
played when the power is turned
on.
1:Frequency reference
2: Output frequency
3:Output current
4:The monitor item set for o1-
01
1 to 4 1 Yes A A A A 501H 6-64
Power-On Moni-
tor
o1-03
Frequency units
of reference set-
ting and monitor
Sets the units that will be set and
displayed for the frequency ref-
erence and frequency monitor.
0:0:0.01 Hz units
1:0.01% units (Maximum out-
put frequency is 100%)
2:min
-1
(2 poles)
3:0.000 m/s
4 to 39: rpm units (Set the
motor poles.)
40 to 39999:User desired dis-
play Set the desired values for
setting and display for the max.
output frequency.
Example: When the max. output
frequency value is 200.0, set
12000.
0 to
39999
i
No
A
0
A
0
A
0
-
502H 6-64
Display
Scaling
-- -
A
1
o1-04
Setting unit for
V/f characteris-
tics parameters
Set the setting unit for V/f pat-
tern related parameters.
0:Hz
1:rpm
0 or 1
i
No - -
A
0
-
503H 6-65
Display Units
A
1
o1-05
LCD Display
contrast
adjustment
Sets the contrast on the optional
LCD operator
(JVOP-160-OY).
0:light
2:
3:normal
4:
5:dark
0 to 5 3 Yes A A A A 504H 6-65
LCD Contrast
Sets the value that is
to be displayed at
100% excluding the
decimal point.
Sets the number of
decimal places.

Omron VARISPEED L7 Specifications

General

Brand	Omron
Model	VARISPEED L7
Category	Inverter
Language	English