Onkyo A-9030 Owner's Manual

16
En
This is an example of connection using the Tuner.
Digital Connection (A-9050 only)
Tip
• The Tuner can be connected to the COAXIAL D1 or D2 jack or
the OPTICAL D3 jack. However, when using the u interlock
function, be sure to connect the Tuner to the COAXIAL D2 jack.
Analog Connection
Tip
• A Tuner can be connected to the LINE IN 1/2/3/4 jack.
However, when using the u interlock function, be sure to
connect the Tuner to the LINE IN 2 jack.
Connecting a Tuner
1
Connect coaxial digital cable to the COAXIAL D2
jack.
2
Set the RI MODE switch to TUNER D2.
Integrated Amplifier
Tuner
1
Connect an audio pin cable to the LINE IN 2 jack.
2
Set the RI MODE switch to TUNER LINE 2.
(A-9050 only)
Integrated Amplifier
Tuner

Onkyo A-9030 Specifications

General

Damping factor	60
Amplifier class	A/B
Frequency range	10 - 100000 Hz
Output impedance	8 Ω
Audio output channels	2.0 channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	105 dB
Total Harmonic Distortion (THD)	0.08 %
RMS power output per channel (1 Ohm)	65 W
Audio (L/R) in	5
Audio (L/R) out	1
Speakers connectivity type	Clamp terminals
Purpose	Home
Material	Aluminium, Metal
Product color	Silver
Volume control	Rotary
Bass adjustment	Yes
Connectivity technology	Wired
Built-in display	No
AC input voltage	220-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	135 W
Package weight	9400 g

Weight and Dimensions

Depth	330.3 mm
Width	435 mm
Height	139 mm
Weight	7400 g