23
En
You can switch inputs to select the desired source
component. Choose an input from the following:
LINE1, LINE2, LINE3, LINE4, LINE5, PHONO
(D1, D2, D3 (A-9050 only))
The LED corresponding to the selected input will light up.
Tip
• The LED will blink when D1, D2 or D3 is selected and a signal
is not input. (A-9050 only)
■ Operating with the remote controller
■ Operating on the integrated amplifier
By bypassing the tone control circuit, the Direct function
uses the shortest path for enhanced sound quality. Also,
since the left/right balance setting uses a system that
doesn’t affect the sound quality, the balance can be
adjusted even if the Direct function is enabled.
From the warm low notes produced by a cello to the deep
frequencies of electronic music, a good compact audio
system should be able to deliver plenty of bass resonance.
While traditional enhancement systems effectively boost
low-frequency sound, they are often prone to the effects of
phase shifting, which can overwhelm mid-range
frequencies and muddy the sound.
Our Phase-Matching Bass Boost technology effectively
preserves mid-range clarity-allowing vocals and strings to
shine-while maintaining a smooth, powerful bass response
at all volume levels.
• When the DIRECT function is on, turn the function off
to use the PHASE MATCHING BASS effect.
Selecting the Input Source
1
Press INPUT!/" repeatedly.
1
Use the INPUT selector.
INPUT !/"
INPUT selector
Using the Direct Function
1
Press the DIRECT button.
The DIRECT LED lights.
Using the PHASE MATCHING BASS
Function
1
Press the PHASE MATCHING BASS button.
The PHASE MATCHING BASS LED lights up.
DIRECT LED DIRECT button
PHASE MATCHING
BASS LED
PHASE MATCHING
BASS button
To Next Page
Loading...
Need help?
General
Weight and Dimensions
