Onkyo A-9030 Owner's Manual

22
En
You can select to output sound from Speakers A,
Speakers B, or both A + B.
Note
• While headphones are connected, this setting is disabled.
• When this setting is set to A + B, the impedance of speakers is
restricted. For further details, see “Connecting Your Speakers”
(➔ page 12).
■ Operating with the remote controller
■ Operating on the integrated amplifier
Tip
• The default level is 0.
Selecting Speakers A and Speakers B
1
Press SPEAKERS repeatedly on the integrated
amplifier.
The LED of the selected speakers lights.
SPEAKERS
button
A LED B LED
Adjusting the Volume
1
Press VOLUME q/w repeatedly.
1
Use the volume controller.
VOLUME q/w
Volume controller

Onkyo A-9030 Specifications

General

Damping factor	60
Amplifier class	A/B
Frequency range	10 - 100000 Hz
Output impedance	8 Ω
Audio output channels	2.0 channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	105 dB
Total Harmonic Distortion (THD)	0.08 %
RMS power output per channel (1 Ohm)	65 W
Audio (L/R) in	5
Audio (L/R) out	1
Speakers connectivity type	Clamp terminals
Purpose	Home
Material	Aluminium, Metal
Product color	Silver
Volume control	Rotary
Bass adjustment	Yes
Connectivity technology	Wired
Built-in display	No
AC input voltage	220-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	135 W
Package weight	9400 g

Weight and Dimensions

Depth	330.3 mm
Width	435 mm
Height	139 mm
Weight	7400 g