Chapter 3: Serial Port, Device and User Configuration
40
The administrator can set up users with specific power device, serial port and host access permissions
who are not a member of any groups. These users don’t have any access to the Management Console
menu nor command line access to the console server.
For convenience, the SDT Connector Retrieve Hosts function retrieves and auto-configures checked serial
ports and checked hosts only, even for admin group users.
3.2.1 Set up new group
To set up new groups and new users, and to classify users as members of particular groups:
1. Select Serial & Network > Users & Groups to display all groups and users
2. Click Add Group to add a new group
3. Add a Group name and Description for each new group, and nominate the Accessible Hosts,
Accessible Ports and Accessible RPC Outlets that users in this new group will be able to access
4. Click Apply
5. The administrator can Edit or Delete any added group
3.2.2 Set up new users
To set up new users, and to classify users as members of particular groups:
1. Select Serial & Network > Users & Groups to display all groups and users
2. Click Add User
To Next Page
Loading...
Need help?
General
Weight and Dimensions
