1 Introduction
1-2 Eagle Operator Manual - OPEX Corp. Use Only - Not for Distribution
Specifications
Physical specifications
Length
19'3" for e-Package (Two stackers are included with e-package.) Each
additional stacker adds 36".
Width
74" at widest point.
Height
75" maximum (on shipping dollies)
Weight
TBD for e-Package
Shipping Size
Maximum sections is 32" wide by 65" long by 75" high.
Envelope specifications
Height
3.5" - 4.4"
Length
9.50" maximum, 6.00" minimum.
Thickness
0.12" maximum at the feed.
Window
Limitations
No open window at the edge opposite the stamp. Plastic windows within 2" of
the edge opposite the stamp will increase reunites due to static attraction.
Long flaps
Allowed up to ½" from bottom edge.
Envelopes with
Attached Bangtails
May be run; they will be outsorted without stopping the machine.
Paper Weight
20 to 24 lb. White wove is best. High stiffness preferred. Lighter paper will
degrade performance. Recycled paper is not recommended due to lack of
stiffness.
Miscellaneous
High paper porosity degrades extract reliability. Envelope designs which
result in damage from the USPS (torn windows or flaps, crumbled, previously
opened, etc.) will degrade performance. Please discuss your envelope
design with your OPEX Sales Engineer.
Return document specifications
Fit
The return document should be designed for a comfortable fit within the return
envelope, with an optimum clearance of 1/8". This will make insertion of the
document and check easier, thus minimizing folded pieces inside the
envelope.
Height
2.75" - 4.25"
Length
5.75 - 9.25"
Paper Weight
18 to 24 lb. white wove is best. High stiffness preferred. Lighter paper will
degrade performance.
MICR Ink on
Document
Magnetic documents may be processed, but they must not have the same
magnetic profile as the check.
To Next Page
Loading...
