OPTIKON R-Evo Smart E - Front Panel Connectors and Control Elements (E and S)

R-evo Smart E/S/CR Installation and use manual
Cod. 1X10XXEN 2020-09-14 Rev.E
48
4.2.3 Front panel connectors and control elements (E and S)
1 US socket (Phaco)
The connector of the phaco handpiece connects to this socket
2 Vitrectomy socket
The connector of the vitrectomy handpiece connects to this socket.
3 Diathermy socket
The connector of the bipolar diathermy handpiece connects to this socket.
4 Power button
This key with indicator light allows the instrument to be switched on and
out of stand-by mode. The mains switch on the rear panel must be in the
(I) on position. The device must be switched off using the software
button on the touchscreen.
1 2 3 4