4.4 USER'S PROGRAMS
Configuring programs for users
All predefined parameters of the R-EVO SMART can be
adapted to the user's individual needs. The parameters thus
set are saved to be reused later in programs and assigned to
users.
The R-EVO SMART can store up to 30 different users and up
to 40 programs per user.
CAUTION Risk of injury to the patient!
• Improper changes made to the settings during application
may result in patient injury.
Creation of users and programs
Creating a new user or a new program
• Before creating a new user or program, set the
desired parameters in the cataract (Anterior
Segment) or retina (Posterior Segment) mode.
• The "Cancel" button becomes active when a
parameter is changed. If you press the button
<Cancel>, the settings prior to the changes are
recalled.
• Press the "Save as" button
• A virtual keyboard with the current user name is
displayed.
• If the new program belongs to the current user, enter
the name of the new program and press the "Save" key.
If you want to save a new program, your name must
include at least three characters and one letter.
• To create a new user, press "New User". The cursor is
then moved to the "User" field where a name can be
entered for the new user.
• Confirm the name of the new user by pressing the
"Save" button, then move the cursor to the "Program"
field.
To Next Page
Loading...
