Optimum OPTimill F 150 User Manual

OPTIMUM
MASCHINEN - GERMANY
Version 1.1.6 dated 2014-10-16Page 98 Original operating instructions
F150GB
Every 1000
operating hours
Wipers on
the slides
Check
Replacing
Check the wipers on the slides.
Replace if damaged immediately.
Switch cabinet
Cleaning  "Cleaning electrical cabinet“ on page 101
Servo motors
Inspection Connections on the servo motors.
Every six months
Tool changer
Check the tool
change function.
Positioning
By manual changing
 "Manual operation of the tool changer“ on
page 76
As required
Chip collection tray
Cleaning
Clean the chip collection tray of the cooling lubri-
cant equipment.
Annually
Chip conveyor
Check
Readjusting
Check, readjust the scraper of the screw conveyor
 "Späneförderer - Chip convejor“ on page 135
Position No 10.
Empirical value of the
operator
Chip collection tray
Cleaning
Clean the precoat filter of the chip tray
 "Maschinengehäuse - Machine housing“ on
page 134 Position No 49.
60 months
Protective covers
Replacing the sight
window
 "Cleaning and replacing of the polycarbonate
windows“ on page 100
Interval Where? What? How?
Check


Optimum OPTimill F 150 Specifications

General

Brand	Optimum
Model	OPTimill F 150
Category	Power Tool
Language	English