Optimum OPTimill MB 4 - Safety; General Safety Principles

Version 1.1.1 - 2021-1-25 5Translation of original instruction
MB4 EN
MB4_GB_1.fm
1 Safety
Glossary of symbols
This part of the operating instructions
 explains the meaning and use of the warning notes included in these operating instructions,
 defines the intended use of the milling machine,
 points out the dangers that might arise for you or others if these instructions are not
observed,
 informs you about how to avoid dangers.
In addition to these operation instructions, please observe
 the applicable laws and regulations,
 the statutory provisions for accident prevention,
 the prohibition, warning and mandatory signs as well as the warning notes on the milling
machine.
When installing, operating, maintaining and repairing the milling machine, the relevant stand-
ards must be observed.
If European standards have not yet been incorporated in the national legislation of the country
in question, the specific applicable regulations of each country must be observed.
If necessary, relevant measures must be taken to comply with national regulations before com-
missioning the milling machine.
Always keep this documentation close to the milling machine.
INFORMATION
If you are unable to rectify an issue using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D-96103 Hallstadt, Germany
Email: info@optimum-maschinen.de
1.1 Rating plates

provides further instructions

calls on you to act

listings
Master Labels
Optimum Maschinen
Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
33384503
320 kg
1,1/1,5 kW
400 V / 3 Ph
~60 Hz
MB 4
1600 U/min
20
NO.
SN
Year
J
DE
GB
ES
FR
IT
CZ
DK
FI
GR
HU
NL
PL
PT
RO
SL
TR
Fräsmaschine
Milling machine
Fresadora
Fraiseuse
Fresatrice
Frézka
Freesmachine
Porajyrsin
Φρεζοδραπανο
Marógép
Freesmachine
Frezarka
Máquina de fresar
Frezalni stroj
Freze Tezgahı
Maşină de frezat
Master Labels
Optimum Maschinen
Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
333 8450
320 kg
1,1/1,5 kW
400 V ~50 Hz
MB 4
3200 U/min
20
NO.
SN
Year
J
DE
GB
ES
FR
IT
CZ
DK
FI
GR
HU
NL
PL
PT
RO
SL
TR
Fräsmaschine
Milling machine
Fresadora
Fraiseuse
Fresatrice
Frézka
Freesmachine
Porajyrsin
Φρεζοδραπανο
Marógép
Freesmachine
Frezarka
Máquina de fresar
Frezalni stroj
Freze Tezgahı
Maşină de frezat