Optimus Compact - 13. OPERATIONS FROM THE FRONT PANEL; 13.1. User levels and changes

COMPACT version 5.0.002
22
Modular audio matrix
with IP connection
COMPACT
R +D Department
13. OPERATIONS FROM THE FRONT PANNEL
13.1. User levels and changes
To restrict the access to specific functions of the equipment, 3 user levels have been established. Basic, Operator and
Administrator.
Basic: Level by default when the equipment is booted. No access code. It cannot modify the volume, network addresses or adjust
the display contrast.
Operator: With access code (by default 1234). The access code may be changed via the Call Point software; It must be a four-digit
number. In addition to all the permissions granted to the basic user, he can configure the volume of the zones (except the
emergency volume) and the contrast of the display. He cannot configure the network addresses.
Administrator: With access code (by default 1234). Without restrictions. The access code may be changed via the Call Point
software. It must be a four-digit number.
A. Login as an ADMINISTRATOR USER
1. Using the / navigation keys, select the settings menu
( ).
2. Using the / keys select USER and press OK.
3. Using the / keys select LOGIN ADMINISTRATOR
(OFF) and press OK.
4. Enter the administrator user code (1 2 3 4 by default)
and press OK. Use the / keys to enter the desired
digit (0 to 9). Scroll to the next digit by using the 
navigation key.
5. Press OK to finish.
B. Logout as ADMINISTRATOR
1. Using the / navigation keys, select the settings menu
( ).
2. Using the / keys select USER and press OK.
3. Using the / keys select LOGOUT ADMINISTRATOR
and press OK.
C. Login as an OPERATOR USER
1. Using the / navigation keys, select the settings menu
( ).
2. Using the / keys select USER and press OK.
3. Using the / keys select LOGIN OPERATOR (OFF) and
press OK.
4. Enter the operator user code (1 2 3 4 by default) and
press OK. Use the / keys to enter the desired digit (0
to 9). Scroll to the next digit by using the  navigation
key.
5. Press OK to finish.
D. Logout as OPERATOR
1. Using the / navigation keys, select the settings menu
( ).
2. Using the / keys select USER and press OK.
3. Using the / keys select LOGOUT OPERATOR and
press OK.
13.2. Adjusting Display Contrast
(Operator or Administrator user level is required)
1. Using the / navigation keys, select the settings menu ( ).
2. Using the / keys select CONTRAST and press OK.
3. Using the / keys adjust the contrast and press OK.
13.3. Front USB connector: Playing music from an external memory
The unit has a USB 2.0 port on the front panel for use as a musical program input. To do this, connect to this port an external
memory that contains audio files in MP3, WAV or OGG format.
Through the Call Point software you can configure the parameters corresponding to this music program (random playback of audio
files, music activated or deactivated by zones...).