Need help?Do you have a question about the Optimus Compact and is the answer not in the manual?
General| Type | Matrix Switcher |
|---|---|
| Video Inputs | 4 |
| HDCP Compliance | HDCP 2.2 |
| Control | RS-232, IR |
| Input Ports | HDMI |
| Output Ports | HDMI |
Details on power supply, network, CAN bus, and fail/input contacts.
How to connect various peripherals to the COMPACT's CAN bus for communication.
Step-by-step guide to configure the CAN bus transmission speed via PC software.
Details on connecting COMPACT and COMPACT-E units using BUS AUDIO LINK and CAN BUS.
Guidelines for connecting COMPACT with other CAN peripherals, including speed settings.
Configuration of UMX-EA3 parameters using internal jumpers and DIPswitches.
Steps for setting up the unit, including card insertion, connections, and software configuration.
How to change the unit's IP address, Netmask, and Gateway via the front panel.
Explanation of visual (LEDs) and audible alarms and how to silence them.
How to view alarm details on the COMPACT display and manage them.
Table detailing component, alarm type, description, and recovery for system faults.
Further details on alarms including ME-200B, contact errors, and COMPACT-E unit detection.
To Next Page
