Chapter 4 - About the software applications
You can run the Admin application from the following:
l
Double-click the desktop icon - .
l
Start Menu – Start > All Programs > optos V2 Vantage Pro > Admin.
Capture application features
The Capture application lets you control the device. You can capture images, check the quality of images
and decide which images are saved or discarded, or need to be recaptured.
Caution
The Introductory Handbook contains safety information. Please read the
Introductory Handbook before attempting to use the system.
The Capture application features include:
l
An image display showing thumbnails of all the images captured in the patient session, with a large
image for assessing image quality, field, and exposure.
l
The application automatically saving images when the session is closed. Images marked to be
discarded will automatically be discarded when the session is closed.
l
optomap® plus Capture procedures. Access to these procedures depends on your system settings:
ask your Optos representative for more information. These procedures let you capture different
types of optomap® images, for example eye steered images and zoomed images. When an image
has been captured using an optomap® plus Capture procedure it can be reviewed using one of
the optomap® plus Review features.
l
optomap® fa Capture procedures. Images must be captured using a device capable of capturing
optomap® fa images.
The Capture application starts automatically. The logo is displayed while the software is starting up.
Review application features
The Review application lets you measure, annotate and add diagnostic codes to images. You can also
import, export and e-mail optomap® images.
optomap® plus and optomap® fa images are reviewed using the enhanced features that are automatically
made available when these images are opened.
Analysis
The Review application contains the following tools.
You can mark-up images using annotations, review notes and diagnostic codes
You can review the current image in the Simulated BIO view. This view simulates the retinal view as it would
be seen via a Binocular Indirect Ophthalmoscope (BIO).
You can also use the 3D Wrap view for patient education purposes. The 3D Wrap view displays the current
image on a 3D model eye. You can run the animated "Fly-Through" or demonstrate refractive errors and
Intraocular Lenses.
Distribution
Once you have completed your review you can send the image to someone else. You can e-mail, export or
print images. If the recipient has the optomap® image viewing application they can review the original
image, see the Optos web site (www.optos.com) for download instructions. Alternatively, an adjusted
image can be sent. The reviewer can look at the image using any common graphics application.
You can print images using in a variety of ways using the printing features.
You can also import images into the patient's record.
Review application features include:
14 of 100
To Next Page
Loading...
