7
Specifications
This chapter provides information regarding the physical, electrical, environmental,
and connector specifications of the Acme Packet 6300/6350.
Environmental, Safety, and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme
Packet 6300/6350, refer to the Acme Packet Platforms Safety and Compliance Guide.
Physical Specifications
Acme Packet 6300/6350 System Chassis Specifications
Table 7-1 Acme Packet 6300/6350 Physical Specifications
Specification Description
Height 5.22” (13.26 cm) (3U)
Width 17.10” (43.43 cm) (+ mounting ear width: 19” (48.26 cm)
Depth 20” (50.8 cm)
Weight approximately 42.5 lbs (19.27 kg), fully loaded
AC Power Supply Physical Dimensions
Table 7-2 Acme Packet 6300/6350 Physical Dimensions
Specification Description
Height 1.575” (4.0 cm)
Width 2.146” (5.45 cm)
Depth 13.26” (33.68 cm)
Weight 2lbs., 5oz. (1.05 kg)
Important: This equipment is intended for installation in locations where the National
Electrical Code (NEC) applies.
7-1
To Next Page
Loading...
Need help?
General
