Network Management Ethernet Ports
3. Route the cable away from the Acme Packet 6300/6350. Make sure that the
Ethernet cables are not stretched tightly or subject to extreme stress.
Acme Packet 6300/6350 with a network management cable connected and
inserted in Mgmt0.
Connected Network Management Port Cable
4. Repeat Steps 1 through 2 for each additional management Ethernet cable you will
connect to your Acme Packet 6300/6350.
Media and Signaling Network Interfaces
This section explains how to connect a cable for media and signaling. The NIU is
available with optical SFP+ Ethernet connectors.
Note:
Perform all cabling procedures according to the established standards for
your organization.
10GbE SFP+ Optical Cabling Procedure
This section explains how to cable the Acme Packet 6300/6350 configured with
10GbE optical NIUs. Either 10-gigabit single mode or multimode fiber optic cabling
with duplex LC connectors are used to connect the Acme Packet 6300/6350 SFP+
based NIUs to your network.
Fiber Optic Cable Handling
When handling a fiber optic cable, please take these precautions:
Chapter 4
Cabling the Acme Packet 6300/6350 System
4-29
To Next Page
Loading...
