Adding Optional Oracle Database Appliance X6-2-HA Storage Shelf Drives (CRU)
Chapter3 • Servicing CRUs That Do Not Require System Power Off 63
Note - If you expand storage, you must first add all of the disks and then expand storage on
all the new disks at the same time. Once you expand storage to support disks in slots 10-19,
you cannot revert to the base configuration (no drives in slots 10-19).
In addition, you cannot add a storage expansion shelf to your appliance configuration until
you have fully populated the existing storage shelf.
■
The oakcli commands listed here must be run as the root user.
1.
To install the new drives into the storage shelf, do the following:
a.
Remove one of the drive filler panels from slots 10-19 by pressing its release
button [1] and removing it from the drive slot [2].
To Next Page
Loading...
Need help?
General