Accessing the Server
These topics include information on establishing low-level communication with the server
using Oracle ILOM and the system console.
■
“Log In to Oracle ILOM” on page 19
■
“Log In to the System Console” on page 20
■
“Obtain the OpenBoot Prompt Under Various Conditions” on page 21
■
“Display the Oracle ILOM Prompt” on page 22
■
“Oracle ILOM Remote System VNC Console” on page 23
Related Information
■
“Accessing the Server” on page 19
■
“Booting and Shutting Down the OS” on page 33
Log In to Oracle ILOM
This procedure assumes that the SP is in the default configuration as described in the server's
installation guide.
Open an SSH session and connect to the SP by specifying its IP address.
The Oracle ILOM default username is root, and the default password is changeme.
% ssh root@xxx.xxx.xxx.xxx
Password: password (nothing displayed as you type)
...
Oracle(R) Integrated Lights Out Manager
Version 3.2.x.x
Copyright (c) 2016, Oracle and/or its affiliates. All rights reserved.
...
Accessing the Server 19
To Next Page
Loading...
Need help?
General