Changing Server Identification Information
This topic describes how to store information (for purposes such as inventory control or site
resource management) on the SP using the Oracle ILOM CLI interface.
■
“Change Server Identifier Information” on page 55
Related Information
■
“Turn On the Locator LED” on page 79
Change Server Identifier Information
Use the /SP system_identifier property to store customer identification information. This
string is encoded in all trap messages generated by SNMP. Assigning a unique system identifier
can be useful in distinguishing which system generates which SNMP message.
At the Oracle ILOM prompt, type:
-> set /SP system_identifier=”data”
Note - You must enclose the data string (data) in quote marks.
Related Information
■
“Log In to Oracle ILOM” on page 19
Changing Server Identification Information 55
To Next Page
Loading...
