Oracle Netra SPARC S7-2 Series User Manual

Power On the Server (Oracle ILOM CLI)
Power On the Server (Oracle ILOM CLI)
Note - By default, the host automatically attempts to boot when the host is reset or
powered on. To learn about the parameters that control this action, see “Configuring Boot
Parameters” on page 43.
1.
Log in to Oracle ILOM.
See “Log In to Oracle ILOM” on page 19.
2.
At the Oracle ILOM prompt, type:
-> start /System
Are you sure you want to start /System (y/n) ? y
Starting /System
Note - To skip being prompted for confirmation, use the start -script /System command.
3.
Switch to the host console to view host output.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Related Information
■
“Power On the Server (Oracle ILOM CLI)” on page 26
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
Power Off the Server (Oracle ILOM CLI)
1.
Log in to Oracle Solaris as a user with root privileges.
2.
Shut down Oracle Solaris.
See one of these procedures:
■
“Shut Down the OS (init Command)” on page 36
■
“Shut Down the OS (shutdown Command)” on page 37
3.
Switch from the system console prompt to the SP console prompt.
26 SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017

Oracle Netra SPARC S7-2 Series Specifications

General

Brand	Oracle
Model	Netra SPARC S7-2 Series
Category	Server
Language	English