Power Off a Server With Multiple Active Domains (Oracle VM Server for SPARC)
4.
Start all of the nonprimary domains.
Starting a domain automatically binds the domain.
# ldm start-domain domain-name
< . . . >
5.
Boot all of the nonprimary domains.
The method you use to access a domain depends on how you have configured the consoles for
your domains.
Boot each domain the same way you boot a server. See “Boot the OS (Oracle
ILOM)” on page 35.
Related Information
■
“Power Off a Server With Multiple Active Domains (Oracle VM Server for
SPARC)” on page 29
Power Off a Server With Multiple Active Domains
(Oracle VM Server for SPARC)
If the server is configured with multiple Oracle VM for SPARC domains, use this procedure to
shut down the domains and power off the server.
1.
If needed, ensure that the domain configurations are saved to the SP.
# ldm add-config config-name
2.
Access and shut down the OS in all of the nonprimary domains.
The method you use to access a domain depends on how you have configured the consoles for
your domains.
To shut down the OS, see “Shut Down the OS (init Command)” on page 36 or “Shut
Down the OS (shutdown Command)” on page 37.
a.
From the primary domain, list the domains and their states.
# ldm ls
Note which domains are non-I/O domains or active I/O domains.
b.
Stop and unbind all the non-I/O domains.
Controlling the Server 29
To Next Page
Loading...
Need help?
General