Reset the Server (Oracle Solaris)
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
■
“Reset the SP” on page 32
Related Information
■
“Powering the Server On and Off” on page 25
Reset the Server (Oracle Solaris)
It is not necessary to power the server off and on to perform a reset.
Note - By default, the host automatically attempts to boot when the host is reset or
powered on. To learn about the parameters that control this action, see “Configuring Boot
Parameters” on page 43.
1.
Log in to Oracle Solaris as a user with root privileges.
2.
Reset the server from the Oracle Solaris prompt, by typing one of these
commands:
■
# shutdown -g0 -i6 -y
■
# reboot
Related Information
■
“Power Off the Server (Oracle ILOM CLI)” on page 26
■
“Power On the Server (Oracle ILOM Web Interface)” on page 27
■
“Reset the Server (Oracle ILOM)” on page 31
Reset the Server (Oracle ILOM)
The Oracle ILOM reset command generates a graceful or forced hardware reset of the server.
By default, the reset command gracefully resets the server.
Controlling the Server 31
To Next Page
Loading...
Need help?
General