Power On the Server (Oracle ILOM Web Interface)
{0} ok #.
->
4.
From the Oracle ILOM prompt, type:
-> stop /System
Are you sure you want to stop /System (y/n)? y
Stopping /System
->
Note - To perform an immediate shutdown, use the stop -force /System command. Ensure
that all data is saved before typing this command.
Related Information
■
“Power On the Server (Oracle ILOM Web Interface)” on page 27
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
Power On the Server (Oracle ILOM Web Interface)
Note - By default, the host automatically attempts to boot when the host is reset or
powered on. To learn about the parameters that control this action, see “Configuring Boot
Parameters” on page 43.
1.
Log in to the Oracle ILOM web interface.
See “Log In to Oracle ILOM” on page 19.
2.
On the Summary page, in the Actions panel, click the Power State Turn On
button.
3.
When prompted, click OK to confirm the action.
Related Information
■
“Power On the Server (Oracle ILOM CLI)” on page 26
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
Controlling the Server 27
To Next Page
Loading...
Need help?
General