Display the Host MAC Address
For example:
dhcp_server_ip = 10.x.x.x
Related Information
■
“Log In to Oracle ILOM” on page 19
■
“Display the Host MAC Address” on page 65
Display the Host MAC Address
The /HOST macaddress property is automatically configured by the server software, so you
cannot set or change the property. The value is read and determined from the server's removable
system configuration card (SCC PROM) and then stored as a property in Oracle ILOM.
The value displayed for /HOST macaddress is for the server's NET 0 port. For each additional
port, the MAC addresses increments from that NET 0 value. For example, the MAC address for
NET 1 is the NET 0 MAC address plus one (1).
At the Oracle ILOM prompt, type:
-> show /HOST macaddress
Related Information
■
“Log In to Oracle ILOM” on page 19
■
“Display the SP Network Parameters” on page 64
Connecting to the SP (In-band)
These topics describe how to use an in-band, or sideband connection, to the SP.
■
“Oracle ILOM In-band (Sideband) Management” on page 66
■
“Configure SP In-band (Sideband) Access” on page 66
Related Information
■
“Accessing the Server” on page 19
Configuring SP and Host Network Addresses 65
To Next Page
Loading...
Need help?
General