Oracle Netra SPARC S7-2 Series User Manual

Obtaining the OpenBoot Prompt
Obtaining the OpenBoot Prompt
There are several ways to reach the OpenBoot prompt (ok).
Note - If you have any problems reaching the OpenBoot Prompt by your chosen method, refer
to some alternatives in “Obtain the OpenBoot Prompt Under Various Conditions” on page 21.
■
“OpenBoot Prompt” on page 38
■
“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39
■
“Obtain the OpenBoot Prompt (Oracle ILOM CLI)” on page 40
■
“Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)” on page 41
Related Information
■
“Log In to Oracle ILOM” on page 19
■
“Booting and Shutting Down Oracle Solaris” on page 33
OpenBoot Prompt
When the host is powered on but the OS is not booted, you communicate with the OpenBoot
firmware. OpenBoot firmware displays ok as its prompt.
For more details about OpenBoot, refer to the OpenBoot 4.x Command Reference Manual at:
http://www.oracle.com/goto/openboot/docs
This table lists the common tasks that are performed at the ok prompt.
Task For More Information
Boot the host. “Boot the OS Manually (OpenBoot)” on page 35
Configure OpenBoot parameters. “View All OpenBoot Parameters” on page 46
“Change the Default Boot Device (OpenBoot)” on page 44
Run diagnostics. Refer to the service manual for your server, detecting and managing
faults.
38 SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017

Oracle Netra SPARC S7-2 Series Specifications

General

Brand	Oracle
Model	Netra SPARC S7-2 Series
Category	Server
Language	English