Oracle Netra SPARC S7-2 Series User Manual

Power Off the Server (Oracle ILOM Web Interface)
Power Off the Server (Oracle ILOM Web Interface)
1.
Log in to Oracle Solaris as a user with root privileges.
2.
Shut down Oracle Solaris.
See:
■
“Shut Down the OS (init Command)” on page 36
■
“Shut Down the OS (shutdown Command)” on page 37
3.
Log in to the Oracle ILOM web interface.
4.
On the Summary page, in the Actions panel, click the Power State Turn Off
button.
5.
When prompted, click OK to confirm the action.
Related Information
■
“Power On the Server (Oracle ILOM CLI)” on page 26
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
Power On a Server With Multiple Active Domains
(Oracle VM Server for SPARC)
If the server is configured with multiple Oracle VM Server for SPARC domains, use this
procedure to power on the server and restart the domains.
1.
Log in to Oracle ILOM.
See “Log In to Oracle ILOM” on page 19.
2.
Power on the host.
-> start /System
Are you sure you want to start /System (y/n) ? y
Starting /System
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
3.
Log in to Oracle Solaris as a user with root privileges.
28 SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017

Oracle Netra SPARC S7-2 Series Specifications

General

Brand	Oracle
Model	Netra SPARC S7-2 Series
Category	Server
Language	English