Disable or Reenable Network Access to the SP
Related Information
■
Oracle ILOM Documentation
■
“Oracle ILOM Overview” on page 11
■
“Log In to Oracle ILOM” on page 19
Disable or Reenable Network Access to the SP
At the Oracle ILOM prompt, type:
-> set /SP/network state=value
where value can be:
■
enabled (Default)
■
disabled
Related Information
■
“Log In to Oracle ILOM” on page 19
■
“SP Network Address Options” on page 63
Display the SP Network Parameters
This procedure displays information such as the network address for the SP.
1.
At the Oracle ILOM prompt, type:
-> show /SP/network
2.
Find the relevant property in the output.
■
If you want the IP address of the SP, view the ipaddress property in the
output.
For example:
ipaddress = 10.x.xx.xxx
■ If you want the IP address of the DHCP server that provided the dynamic IP
address requested by the SP, view the dhcp_server_ip property in the output.
64 SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017
To Next Page
Loading...
