Override OpenBoot Settings to Reset the Server
Override OpenBoot Settings to Reset the Server
Use this procedure to override the OpenBoot settings and initiate reboot of the control domain,
which results in the host booting to the OpenBoot prompt.
At the Oracle ILOM prompt, type:
-> set /HOST/domain/control auto-boot=disabled
-> reset /HOST/domain/control [-force] [-script]
The host reboots and stops at the OpenBoot prompt.
Related Information
■
“Change the Host Boot Mode Behavior at Reset (Oracle ILOM)” on page 51
■
“Configuring Boot and Restart Behavior” on page 43
■
“Boot Mode Overview (Oracle ILOM)” on page 49
■
“Oracle VM Server for SPARC Overview” on page 14
Server Restart Behavior Configuration (Oracle ILOM)
In addition to making temporary changes in boot behavior, you can also use Oracle ILOM to
set how the host behaves when an error is encountered. For details on these options, refer to the
section on setting boot behavior on a SPARC host server in the Configuration and Maintenance
Guide for your Oracle ILOM release.
Related Information
■
“Resetting the Server and SP” on page 30
Configuring Boot and Restart Behavior 53
To Next Page
Loading...
Need help?
General