Oracle Netra SPARC S7-2 Series - Page 71

Display Server Components (Oracle ILOM)
Note - This document applies to several server products. The following example is based on the
SPARC T7-2 server. Your output might vary from the examples based on your product.
-> show components
Target | Property | Value
----------------------------------+----------------------------------------
+---------------------------------------------------------
/SYS/MB/CMP0 | current_config_state | Enabled
/SYS/MB/CMP0/CLX/CLINK0 | current_config_state | Enabled
/SYS/MB/CMP0/CLX/CLINK1 | current_config_state | Enabled
/SYS/MB/CMP0/CLX/CLINK2 | current_config_state | Enabled
/SYS/MB/CMP0/CLX/CLINK3 | current_config_state | Enabled
/SYS/MB/CMP0/DAX0 | current_config_state | Enabled
/SYS/MB/CMP0/DAX1 | current_config_state | Enabled
/SYS/MB/CMP0/DAX2 | current_config_state | Enabled
/SYS/MB/CMP0/DAX3 | current_config_state | Enabled
/SYS/MB/CMP0/IOS0 | current_config_state | Enabled
/SYS/MB/CMP0/IOS1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH0/D0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH0/D1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH1/D0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU0/CH1/D1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1/CH0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1/CH0/D0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1/CH0/D1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1/CH1 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1/CH1/D0 | current_config_state | Enabled
/SYS/MB/CMP0/MCU1/CH1/D1 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0/CORE0 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0/CORE1 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0/CORE2 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0/CORE3 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0/L2D0 | current_config_state | Enabled
/SYS/MB/CMP0/SCC0/L2D1 | current_config_state | Enabled
/SYS/MB/CMP0/SCC1 | current_config_state | Enabled
/SYS/MB/CMP0/SCC1/CORE0 | current_config_state | Enabled
/SYS/MB/CMP0/SCC1/CORE1 | current_config_state | Enabled
/SYS/MB/CMP0/SCC1/CORE2 | current_config_state | Enabled
/SYS/MB/CMP0/SCC1/CORE3 | current_config_state | Enabled
/SYS/MB/CMP0/SCC1/L2D0 | current_config_state | Enabled
Matching Devices to Device Names 71