Oracle Netra SPARC S7-2 Series - Page 85

Update the Firmware
A series of prompts appear.
c.
Type y to load the image file, then type y to enable the Preserve Configuration
option, which saves and restores the existing Oracle ILOM firmware settings
after the firmware update is complete.
Note - All firmware update options for your server are enabled (y) by default when using a
script (-script) to perform the firmware update.
d.
Oracle ILOM displays a status message when the firmware process is
complete. The system will reboot to apply the new firmware image.
Related Information
■
“Display the Firmware Versions” on page 83
Updating the Firmware 85