Oracle SPARC - Power on a Server with Multiple Active Domains (Oracle VM Server for SPARC)

Power On a Server With Multiple Active Domains (Oracle VM Server for SPARC)
Power On a Server With Multiple Active Domains
(Oracle VM Server for SPARC)
If the server is configured with multiple Oracle VM Server for SPARC domains, use this
procedure to power on the server and restart the domains.
1.
Log in to Oracle ILOM.
See “Log In to Oracle ILOM” on page 17.
Note - If you have a modular system, ensure that you are logged in to the desired server
module.
2.
Power on the host.
-> start /System
Are you sure you want to start /System (y/n) ? y
Starting /System
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
3.
Log in to Oracle Solaris as a user with root privileges.
4.
Start all of the nonprimary domains.
Starting a domain automatically binds the domain.
# ldm start-domain domain-name
< . . . >
5.
Boot all of the nonprimary domains.
The method you use to access a domain depends on how you have configured the consoles for
your domains.
Boot each domain the same way you boot a server. See “Boot the OS (Oracle
ILOM)” on page 35.
Related Information
■
“Power Off a Server With Multiple Active Domains (Oracle VM Server for
SPARC)” on page 28
Controlling the Server 27