Oracle SPARC User Manual

Obtaining the OpenBoot Prompt

SPARC T5-2, No Keyboard
Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights
reserved.
OpenBoot 4.33.1, 32256 MB memory available, Serial #xxxxxxxx.
Ethernet address 0:xx:xx:xx:xx:xx, Host ID: xxxxxxxx.
{0} ok
Related Information
■
“Shut Down the OS (init Command)” on page 36
Obtaining the OpenBoot Prompt
There are several ways to reach the OpenBoot prompt (ok).
■
“OpenBoot Prompt” on page 38
■
“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39
■
“Obtain the OpenBoot Prompt (Oracle ILOM CLI)” on page 40
■
“Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)” on page 41
Related Information
■
“Log In to Oracle ILOM” on page 17
■
“Booting and Shutting Down Oracle Solaris” on page 33
OpenBoot Prompt
When the host is powered on but the OS is not booted, you communicate with the OpenBoot
firmware. OpenBoot firmware displays ok as its prompt.
This table lists the common tasks that are performed at the ok prompt:
Task For More Information
Boot the host. “Boot the OS Manually (OpenBoot)” on page 35
Configure OpenBoot parameters. “View All OpenBoot Parameters” on page 47
38 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Oracle SPARC Specifications

General

Operating System	Oracle Solaris
Virtualization	Oracle VM Server for SPARC
Processor	SPARC
Threads per Core	8
Memory Type	DDR4
Storage	SAS, SATA
Security Features	Cryptographic Acceleration