Oracle SPARC User Manual

Power On the Server (Oracle ILOM Web Interface)
See one of these procedures:
■
“Shut Down the OS (init Command)” on page 36
■
“Shut Down the OS (shutdown Command)” on page 37
3.
Switch from the system console prompt to the SP console prompt.
{0} ok #.
->
4.
From the Oracle ILOM prompt, type:
-> stop /System
Are you sure you want to stop /System (y/n)? y
Stopping /System

->
Note - To perform an immediate shutdown, use the stop -script /System command. Ensure
that all data is saved before typing this command.
Related Information
■
“Power On the Server (Oracle ILOM Web Interface)” on page 25
■
“Reset the Server (Oracle Solaris)” on page 30
■
“Reset the Server (Oracle ILOM)” on page 30
Power On the Server (Oracle ILOM Web Interface)
Note - By default, the host automatically attempts to boot when the host is reset or
powered on. To learn about the parameters that control this action, see “Configuring Boot
Parameters” on page 43.
1.
Log in to the Oracle ILOM web interface.
See “Log In to Oracle ILOM” on page 17.
Note - If you have a modular system, ensure that you are logged in to the desired server
module.
Controlling the Server 25

Oracle SPARC Specifications

General

Operating System	Oracle Solaris
Virtualization	Oracle VM Server for SPARC
Processor	SPARC
Threads per Core	8
Memory Type	DDR4
Storage	SAS, SATA
Security Features	Cryptographic Acceleration