Mode Sense (10)
Julyl 2017 Command Set 157
Element Address Assignment Page Definitions:
PS The Parameters Saveable bit is set to 0.
Page Code Identifies the Element Address Assignment mode page and returns a
value of 1Dh.
Parameter Length 12h = Indicates the amount of element address data following this byte.
First Medium Transport
Element Address
0000h = Identifies the address of the hand.
Number of Medium
Transport Elements
0001h = Identifies the number of hands within the library
First Storage Element
Address
03E8h = Identifies the starting address of the cartridge tape storage cells.
Number of Storage
Elements
Identifies the number of cartridge tape storage cells within the library.
The total number of cartridge tape storage cells depends on how the library is
configured.
First Import /
Export Element Address
000Ah = Identifies the address of the first Import/Export element.
Number of Import /
Export Elements
Identifies the total number of import/export cells.
First Data Transfer
Element Address
01F4h = Identifies the first tape drive or drive slot. If the Address All Drive
Slots option is set, then the first Data Transfer Element Address may be an
empty drive slot.
Number of Data Transfer
Elements
Identifies the number of tape drives. If the Address All Drive Slots option is
set, then the number of Data Transfer Elements includes all empty and full
drive slots.
To Next Page
Loading...
Need help?
General