Initialize Element Status
30 SL150 Interface Reference Manual Julyl 2017
Initialize Element Status
The host uses the Initialize Element Status command (07h) to request an inventory of
the cartridge tapes held in the library. The library accepts this command for
compatibility, but does not perform any action.
At power-on the library performs an audit of and maintains the inventory during
operations. The library also performs an audit after someone has opened and closed
the front door.
An initiator can obtain inventory information for the library by using the Read
Element Status command.
TABLE 4-6 Initialize Element Status Command
Byte
Bit
76543210
0 Operation Code (07h)
1 Ignored Reserved (00h)
2 Reserved (00h)
3 Reserved (00h)
4 Reserved (00h)
5 Control Byte (00h)
To Next Page
Loading...
Need help?
General