Mode Sense (6)
114 SL150 Interface Reference Manual Julyl 2017
SAS Port Control Page (HP Bridged)
TABLE 4-55 shows the format of the SAS Port Control page.
TABLE 4-55 SAS Port Control Page
Byte
Bit
76543210
0 PS (0) SPF (0) Page Code (19h)
1 Page Length (0Eh)
2 RSVD
Continue
AWT
BAE LED Protocol Identifier (6h)
3 Reserved
4
to
5
(MSB)
I_T Nexus Loss Time
(LSB)
6
to
7
(MSB)
Initiator Response Timeout
(LSB)
8
to
9
(MSB)
Reject to Open Limit
(LSB)
10
to
15
(MSB)
Reserved (00h)
(LSB)
SAS Port Control Page Definitions:
PS The parameters Saveable bit is set to 0.
SPF The library returns a value of:
0 = SubPage Format bit, indicating page_0 format is being used.
Page Code This field is set to:
19h that identifies the page as the SAS Port Control mode page.
Protocol Identifier This field is set to:
06h to indicate the Serial Attached SCSI (SAS) protocol.
Continuous AWT
0 = The SAS port shall stop the Arbitration Wait Time timer and set the
Arbitration Wait Time timer to zero when it receives an OPEN_REJECT
(RETRY).
1 = The SAS port shall not stop the Arbitration Wait Time timer and shall
not set the Arbitration Wait Time timer to zero when the SAS port receives
an OPEN_REJECT (RETRY).