Oracle storagetek sl150 Reference Manual

Mode Select (10)
80 SL150 Interface Reference Manual Julyl 2017
Mode Select (10) Data
The initiator must provide mode parameter data in a parameter list including:
“Mode Select Parameter Header” on page 80
“Fibre Channel Disconnect/Reconnect Page (HP Bridged)” on page 81
“SAS Disconnect/Reconnect Page (HP Bridged)” on page 83
“Fibre Channel Logical Unit Page (HP Bridged)” on page 85
“SAS Logical Unit Page (HP Bridged)” on page 86
“Fibre Channel Port Control Page (HP Bridged)” on page 87
“SAS Port Control Page (HP Bridged)” on page 90
“SAS Phy Control and Discover Mode Subpage (HP Bridged)” on page 92
“Informational Exceptions TapeAlert Page” on page 95 or
“Element Address Assignment Mode Page” on page 97
Mode Select (10) Parameter Header
The library returns a 8-byte Mode Select parameter header as follows:
Note – The header definitions for the library must be all 00h.
TABLE 4-37 Mode Select Parameter Header
Byte
Bit
76543210
0 Reserved (00h)
1 Reserved (00h)
2 Reserved (00h)
3 Reserved (00h)
4 Reserved (00h)
5 Reserved (00h)
6 Reserved (00h)
7 Reserved (00h)

Oracle storagetek sl150 Specifications

General

Brand	Oracle
Model	storagetek sl150
Category	Storage
Language	English