Oracle storagetek sl150 Reference Manual

Persistent Reserve In
Julyl 2017 Command Set 169
Report Capabilities Data
The format for the parameter data provided in response to a Persistent Reserve In
command with the Report Capabilities service action is shown in TABLE 4-89.
TABLE 4-89 Report Capabilities Data
Byte
Bit
76543210
0
to
1
(MSB)
Length (0008h)
(LSB)
2 Reserved
(000b)
CRH
(1)
SIP_C
(1)
ATP_C
(0)
Rsvd
(0)
PTPL_C
(1)
3 TMV (1) Reserved (00h) PTPL_A
4
to
5
(MSB)
Persistent Reservation Mask
(LSB)
6
to
7
Reserved (00h)
Report Capabilities Data Definitions:
Length
This field indicates the length in bytes of the parameter data.
CRH
The Compatibility Reservation Handling bit is set to a value of 1
indicating the library supports the exceptions to the SPC-2 RESERVE and
RELEASE commands as described in SPC-3.
SIP_C
The library will return a value of 1 for the Specify Initiator Ports Capable
bit, indicating the SPEC_I_PT bit in the PERSISTENT RESERVE OUT
command parameter data is supported.
ATP_C
All Target Ports Capable bit
0 = The library does not support the ALL_TG_PT bit in the PERSISTENT
RESERVE OUT command parameter data.
1 = The library supports the ALL_TG_PT bit in the PERSISTENT RESERVE
OUT command parameter data.
PTPL_C
Persist Through Power Loss Capable bit
0 = The library does not support the persist through power loss capability
for persistent reservations and the APTPL bit in the in PERSISTENT
RESERVE OUT command parameter data
1 = The library supports the persist through power loss capability for
persistent reservations and the APTPL bit in the in PERSISTENT RESERVE
OUT command parameter data

Oracle storagetek sl150 Specifications

General

Brand	Oracle
Model	storagetek sl150
Category	Storage
Language	English