Oracle storagetek sl150

Inquiry
Julyl 2017 Command Set 35
Standard Inquiry Data Definitions (HP Bridged):
Peripheral Qualifier The library returns a value of:
• 000b= Indicating the specified peripheral device type is currently
connected to this logical unit.
• 011b = If the command is sent to an unsupported logical unit.
(b = binary notation)
Peripheral Device Type The library returns a value of:
• 8h = Indicates that the library is a medium changer device.
• 1Fh = If the command is sent to an unsupported logical unit.
RMB Removable Medium;
The library returns a value of 1 indicating the medium is removable.
Version The library returns a value of 5h, which indicates compliance to SCSI-3.
NormACA The Normal Auto Contingent Allegiance (NACA) bit controls the rules for
handling an auto contingent condition caused by a command.
The library returns a value of 0, indicating it does not support setting the
NACA bit to one in the control byte of a CDB.
HiSup The library returns a value of 1, indicating the library uses the hierarchical
addressing model to identify logical units.
Response Data Format A value of 2 indicates the data found is in accordance with the SCSI-3
specification.
Additional Length 1Fh = The library has 31 additional bytes of Standard Inquiry Data available t o
the initiator.
45h = The library has 69 additional bytes of Standard Inquiry Data available to
the initiator. This value is returned if the Allocation Length in the CDB is 36
bytes or larger.
SCCS The library returns a value of 0, indicating the library does not contain an
embedded storage array controller component.
ACC The library returns a value of 0, indicating it does not contain an access control
coordinator that may be addressed through this logical unit.
TPGS 01b = Implicit asymmetric logical unit access is supported. The SCSI target
device is capable of changing target port asymmetric access states without a
SET TARGET PORT GROUPS command. The REPORT TARGET PORT
GROUPS command is supported and the SET TARGET PORT GROUPS
command is not supported.
3PC The library returns a value of:
0 indicating third-party commands are not supported.
Protect The library returns a value of:
0 indicating that it does not support protection information.
VS Vendor Specific bit is set to:
0 indicating that there is no vendor-specific information with this command.
MultiP Multiple Ports
0b indicates there are no multiple target ports.
1b indicates there are multiple target ports.