Oracle storagetek sl150 Reference Manual

Inquiry
Julyl 2017 Command Set 43
Device Identification Page Definitions (HP Bridged):
Peripheral Qualifier The library returns a value of:
• 000b= Indicating the specified peripheral device type is currently
connected to this logical unit.
• 011b = If the command is sent to an unsupported logical unit.
(b = binary notation)
Peripheral Device Type The library returns a value of:
• 8h = Indicates that the library is a medium changer device.
• 1Fh = If the command is sent to an unsupported logical unit.
Additional Page Length A value of:
42h = indicates there are 66d additional bytes of Device ID Inquiry Data available
to the initiator.
Protocol Identifier
• 0h = Fibre Channel
• 6h = Serial Attached SCSI
Code Set 1h = The identifier field contains binary values
2h = The identifier field contains ASCII printable characters
Identifier Type 1h = The identifier field contains T10 Vendor ID data
3h = The identifier field contains a 64-bit IEEE Registered Address
4h = The identifier field contains the Relative Target Port Identifier
Identifier Length 4h = The identifier length for the Relative Target Port Identifier
8h = The identifier length for the Node Name Identifier
2Ah = The identifier length for the T10 Vendor ID data
Association 00b = The identifier field is associated with the addressed logical unit.
01b = The identifier field is associated with the target port that received the
request.
PIV 0b = The protocol identifier field contents are reserved.
1b = The protocol identifier field is valid.
Vendor Identification Contains the ASCII character sequence “STK” followed by blanks. If the specified
logical unit is not supported, this field contains all blanks.
Product Identification This field contains the ASCII character sequence “SL150” followed by blanks.
Relative Target Port
Identifier
• 1 = Target Port 1
• 2 = Target Port 2
Unit Serial Number This field contains a unique 18 character ASCII identifier for the library.
For example: 464970G+1221XX0005
Where: XX indicates the library partition number, when the library is partitioned.
P1: Partition 1
P2: Partition 2
P3: Partition 3
P4: Partition 4
P5: Partition 5
P6: Partition 6
P7: Partition 7
P8: Partition 8
The serial number in not modified, when the library is non-partitioned.
NAA Identifier This field contains the IEEE Registered name for the bridged tape drive. See
TABLE 4-14.

Oracle storagetek sl150 Specifications

General

Brand	Oracle
Model	storagetek sl150
Category	Storage
Language	English