EasyManuals Logo
Home>Oracle>Storage>storagetek sl150

Oracle storagetek sl150 Reference Manual

Oracle storagetek sl150
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Mode Select (6)
Julyl 2017 Command Set 69
Serial Attached SCSI Port Control Page Definitions:
PS The parameters Saveable bit is set to 0.
SPF The library returns a value of:
0 = SubPage Format bit, indicating page_0 format is being used.
Page Code This field is set to:
19h that identifies the page as the SAS Port Control mode page
Protocol Identifier This field is set to:
06h indicating the Serial Attached SCSI protocol
Continue AWT Continuous Arbitration Wait Time (AWT)
0 = The SAS port shall stop the AWT timer and set the AWT timer to zero
when it receives an OPEN_REJECT (RETRY).
1 = The SAS port shall not stop the AWT timer and shall not set the AWT
timer to zero when the SAS port receives an OPEN_REJECT (RETRY).
BAE Broadcast Asynchronous Event (BAE). The device server shall:
0 = Disable origination of Broadcast (Asynchronous Event).
1 = Enable origination of Broadcast (Asynchronous Event).
Ready LED Meaning The Ready LED Meaning bit specifies the READY LED signal behavior.
I_T Nexus Loss Time This field contains the minimum time that the SSP Target Port shall retry
connection requests to an SSP initiator port that are rejected with responses
indicating the SSP initiator port may no longer be present before recognizing
an I_T nexus loss:
0000h = Vendor-specific amount of time.
0001h - FFFFh = Time in milliseconds.
FFFFh = The SSP target port shall never recognize an I_T nexus loss.
Initiator Response
Timeout
This field contains the minimum time in milliseconds that the SSP target port
shall wait for the receipt of a frame before aborting the command associated
with that frame.
0000h indicates that the SSP target port shall wait forever.
Reject to Open Limit This field contains the minimum time in 10 microsecond increments that the
target port shall wait to establish a connection request with an initiator port on
an I_T nexus after receiving an OPEN_REJECT
(RETRY), OPEN_REJECT (RESERVED CONTINUE 0), or OPEN_REJECT
(RESERVED CONTINUE 1)
0000h indicates that minimum time is vendor specific.

Table of Contents

Other manuals for Oracle storagetek sl150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle storagetek sl150 and is the answer not in the manual?

Oracle storagetek sl150 Specifications

General IconGeneral
BrandOracle
Modelstoragetek sl150
CategoryStorage
LanguageEnglish

Related product manuals