Mode Select (10)
Julyl 2017 Command Set 91
I_T Nexus Loss Time
This field contains the minimum time that the SSP Target Port shall retry
connection requests to an SSP initiator port that are rejected with responses
indicating the SSP initiator port may no longer be present before
recognizing an I_T nexus loss:
0000h = Vendor-specific amount of time.
0001h - FFFFh = Time in milliseconds.
FFFFh = The SSP target port shall never recognize an I_T nexus loss.
Initiator Response
Timeout
This field contains the minimum time in milliseconds that the SSP target
port shall wait for the receipt of a frame before aborting the command
associated with that frame.
The value 0000h indicates that the SSP target port shall wait forever.
Reject to Open Limit
This field contains the minimum time in 10 microsecond increments that
the target port shall wait to establish a connection request with an initiator
port on an I_T nexus after receiving an OPEN_REJECT
(RETRY), OPEN_REJECT (RESERVED CONTINUE 0), or OPEN_REJECT
(RESERVED CONTINUE 1)
The value 0000h indicates that minimum time is vendor specific.
To Next Page
Loading...
Need help?
General