a. Ensure that there are solid lines in the active cluster links diagram and click
COMMIT.
If you do not see solid lines, ensure that the cluster cables connecting the two
controllers together are properly connected and secure in their connectors. The
system automatically senses these cables in real-time. Oracle ZFS Storage ZS9-2
controllers use two redundant Ethernet links that do not cross over each other; all
other controllers use two redundant serial links that form a crossover pattern, and
one Ethernet link.
Oracle ZFS Storage ZS9-2 Controller:
All Other Controllers:
b. Set the appliance name and password for the peer controller:
• Appliance Name - Enter the peer controller name (must be different from
primary controller name).
• Root Password - Enter the same password that you set for the appliance during
system configuration.
• Confirm Password - Re-enter the password.
Chapter 13
Performing Initial Configuration (BUI)
13-7
To Next Page
Loading...
Need help?
General
