range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn
12
www.xunlong.tv
c. After the image is written, click the "Exit" button to exit, then you can pull out
the TF card and insert it into the development board to start
2.4. Method of flashing Linux image or OpenWRT image to TF
card based on Ubuntu PC
1) The method of flashing OpenWRT image based on Ubuntu PC is the same as that of
flashing Linux image. The following is an example of flashing Linux image
2) First prepare a TF card with 8GB or larger capacity. The transmission speed of the TF
card must be above class10. It is recommended to use a TF card of SanDisk and other
brands
3) Then use a card reader to insert the TF card into the computer
4) Download balenaEtcher software, the download address is
https://www.balena.io/etcher/
5) After entering the balenaEtcher download page, please select the Linux version of the
software through the drop-down box to download
To Next Page
Loading...
