Need help?Do you have a question about the Orange Pi PC Plus and is the answer not in the manual?
General| Processor | Allwinner H3 Quad-core Cortex-A7 |
|---|---|
| RAM | 1GB DDR3 |
| Storage | 8GB eMMC Flash |
| MicroSD Slot | Yes |
| USB Ports | 3 x USB 2.0 |
| USB OTG | Yes |
| Operating System | Android, Ubuntu, Debian |
| GPU | Mali400MP2 |
| HDMI | HDMI 1.4 |
| Ethernet | 10/100Mbps |
| Wi-Fi | 802.11 b/g/n |
| Audio Output | 3.5mm audio port |
| Power | 5V/2A |
| GPIO | 40Pin Header |
Introduction to the Orange Pi PC Plus single-board computer.
Explains the capabilities and applications of the development board.
Identifies the target audience and purpose of the development board.
Detailed specifications of the Orange Pi PC Plus hardware components.
Visual representation of the top and bottom sides of the development board.
Detailed description and labeling of the board's various interfaces.
Lists essential hardware and accessories required for using the development board.
Provides URLs and details for downloading OS images and documentation.
Instructions for testing the board using the pre-installed Android system.
Step-by-step guide for flashing Linux images using Windows.
Step-by-step guide for flashing Linux images using Ubuntu.
Instructions for flashing Linux images directly to the eMMC.
Guide for flashing Android firmware onto a TF card.
Steps to flash Android firmware directly onto the eMMC.
Instructions on how to power on and boot the development board.
Guide on connecting and using the serial port for debugging.
Lists compatible Linux distributions and their kernel versions.
Details the status of driver support for the Linux 5.4 kernel.
Details the status of driver support for the Linux 3.4 kernel.
Provides default login credentials for Linux systems.
Explains how to control the status LEDs on the development board.
Instructions on configuring automatic login for the desktop environment.
Details the automatic root filesystem expansion on first boot for Linux 5.4.
Explains automatic root filesystem expansion for Linux 3.4.
Guide to adjusting the system's log verbosity for debugging.
Procedure for testing the Ethernet network connectivity.
Instructions for remotely accessing the board via SSH.
Steps to test the HDMI output functionality.
Guide for connecting to a Wi-Fi network.
Connects to Wi-Fi using command-line interface for server images.
Connects to Wi-Fi using graphical interface for server images.
How to connect to Wi-Fi on the desktop version of the image.
Tests for USB device connectivity and functionality.
Verifies the functionality of USB mouse and keyboard.
Tests the connection and recognition of USB storage devices.
Tests the functionality of USB Ethernet adapters.
Procedure for testing USB camera functionality.
Tests for audio playback and recording capabilities.
Steps to perform microphone recording tests.
Tests audio output via HDMI.
Tests the IR receiver functionality with Linux 5.4.
Tests the IR receiver functionality with Linux 3.4.
Tests the hardware watchdog timer functionality.
Procedures for testing CSI cameras.
Tests the GC2035 camera with Linux 3.4.
Tests the OV5640 camera with Linux 5.4.
Details the pinout of the 40-pin GPIO header.
Guide for installing the wiringOP library for GPIO control.
Tests for GPIO, I2C, UART, and SPI interfaces using wiringOP.
Tests basic GPIO functionality for setting levels.
Tests the SPI communication interface.
Tests the I2C communication interface.
Tests the UART communication interface.
Guide for using a 0.96-inch OLED display via I2C.
Instructions for using SPI LCD displays.
Guide for using a 2.4-inch SPI LCD display.
Guide for using a 3.2-inch SPI LCD display.
Guide for using a 3.5-inch SPI LCD display.
Tests the GPU driver performance in the Linux 3.4 desktop version.
Instructions for flashing a Linux image onto the eMMC storage.
Method to check the H3 chip ID for identification.
Guide for using the TV-OUT feature with Linux 3.4.
Procedures for booting up and shutting down the development board.
Lists the Android versions supported by the development board.
Details the functionality support for Android 4.4.
Details the functionality support for Android 7.0.
Explanation of the onboard LED indicators.
Guide for using Android Debug Bridge (ADB).
Steps to enable USB debugging in Android 7.0.
Connects the device for ADB debugging via USB cable.
Debugs using ADB over a network connection.
Guide for connecting and using USB cameras.
Instructions for using CSI cameras.
Connects and uses the GC2035 camera in Android 4.4.
Connects and uses the OV5640 camera in Android 4.4.
Instructions for downloading the Linux SDK source code.
Steps to download the necessary cross-compilation toolchain.
Explains the directory layout of the orangepi-build project.
Guide for compiling the U-Boot bootloader.
Steps to compile the Linux kernel.
Guide for compiling the root filesystem.
Steps to compile a complete Linux image.
Guide for using the Android 4.4 SDK.
Instructions for downloading the Android 4.4 SDK source code.
Steps to set up the Android compilation environment.
Guide for compiling the Android image.
Steps to compile the Android source code.
Guide for using the Android 7.0 SDK.
Steps to set up the Android compilation environment.
Guide for compiling the Android image.
Steps to compile the Android source code.
To Next Page
