Orange Pi PC Plus - Connect ADB via Data Cable

range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 111 www.xunlong.tv
2) Then open the developer options
3) Then make sure that USB debugging is turned on
4.5.3.
Use data cable to connect adb for debugging
1) First make sure that the USB debugging option has been turned on
2) Prepare a USB-to-Micro USB cable, insert the USB interface into the USB interface
of the computer, and insert one end of the Micro USB interface into the USB OTG
interface of the development board