range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 106 www.xunlong.tv
4) Then the signal source at one end of the TV needs to select the video input. Different
TV setting methods may be different. Please refer to the corresponding instruction
manual. If the connection settings are correct, you can see the output of the linux system
TV-OUT on the TV. Up
3.31. Boot and shutdown method
1) Shut down using the poweroff command
root@orangepi:~# poweroff
2) You can also short press the power button on the development board to shut down
（
The linux3.4 server version is temporarily unavailable
）
To Next Page
Loading...
