Orange Pi PC Plus - Use Pre-installed Android Image for Testing; Flash Linux Image to TF Card (Windows)

range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 13 www.xunlong.tv
will assist in solving various problems. This is also a fastest solution way to the
problem.Orange Pi is not responsible for maintaining this image.
2.3. Use the Android image pre-installed in eMMC to test the
functions of the development board
Orange Pi PC Plus has 8GB of eMMC onboard. Before leaving the factory, the
factory will pre-install Android image to eMMC for testing. After getting the
development board, you can use the pre-installed Android image in eMMC to test the
functions of the development board and confirm the development. After all the functions
of the board are ok, then burn the system you want to use
2.4. Method of flashing Linux image to TF card based on
Windows PC
1) First, prepare a TF card with 8GB or larger capacity. The transmission speed of the TF
card must be above class10. It is recommended to use a TF card of SanDisk and other
brands
2) Then use the card reader to insert the TF card into the windows computer
3) Then format the TF card
a. You can use the SD Card Formatter software to format the TF card, the
download address is
https://www.sdcard.org/downloads/formatter/eula_windows/SDCardFormatterv5_WinEN.zip
b. After downloading, you can directly unzip and install, and then open the
software