Orange Pi PC Plus - Flash Linux Image to TF Card (Ubuntu)

range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 15 www.xunlong.tv
burn from the Orange Pi data download page, and then use the decompression software to
decompress it. In the decompressed file, the file ending with ".img" is the operating
system image file. The size is generally above 1GB
5) Use Win32Diskimager to burn Linux image to TF card
a. The download page of Win32Diskimager is
http://sourceforge.net/projects/win32diskimager/files/Archive/
b. Install directly after downloading, the interface of Win32Diskimager is shown
below
a) First select the path of the image file
b) Then confirm that the drive letter of the TF card is consistent with the one
displayed in the "Device" column
c) Finally click "write" to start burning
c. After the image is written, click the "Exit" button to exit, and then you can pull
out the TF card and insert it into the development board to start
2.5.
Method of flashing Linux image to TF card based on Ubuntu
PC
1) First, prepare a TF card with 8GB or larger capacity. The transmission speed of the TF
card must be above class10. It is recommended to use a TF card of SanDisk and other
brands