range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn
67
www.xunlong.tv
TX packets 26 bytes 3802 (3.8 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
10) Use the ping command to test the connectivity of the wifi network
root@orangepir1plus:~# ping www.baidu.com -I wlxd0c0bf8742cd
PING www.a.shifen.com (14.215.177.39) from 192.168.1.198 wlxd0c0bf8742cd: 56(84)
bytes of data.
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=1 ttl=56 time=7.39 ms
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=2 ttl=56 time=7.72 ms
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=3 ttl=56 time=8.79 ms
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=4 ttl=56 time=10.2 ms
64 bytes from 14.215.177.39 (14.215.177.39): icmp_seq=5 ttl=56 time=8.83 ms
^C
--- www.a.shifen.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 7.391/8.607/10.296/1.021 ms
5.12. Bluetooth test
5.12.1. Linux OS test method
1) The bluez tool is required to use the Bluetooth connection. Use the following
command to install the bluez tool
root@orangepir1plus:~# apt update
root@orangepir1plus:~# apt install bluez
2) First check the Bluetooth device information through hciconfig -a, the following
information appears, indicating that the Bluetooth initialization is normal
root@orangepir1plus:~# hciconfig -a
hci0: Type: Primary Bus: USB
BD Address: 00:13:EF:F4:58:AE ACL MTU: 1021:8 SCO MTU: 255:16
UP RUNNING PSCAN
RX bytes:15875 acl:28 sco:0 events:367 errors:0
TX bytes:28282 acl:28 sco:0 commands:232 errors:0
Features: 0xff 0xff 0xff 0xfa 0xdb 0xfd 0x7b 0x87
To Next Page
Loading...
