range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn
90
www.xunlong.tv
f. After pressing the Enter key, a Warring will pop up first
g. Press Enter again to start updating u-boot, and the following information will be
displayed after the update
h. Then you can restart the development board to test whether the u-boot
modification takes effect
6.3. Compile the Linux kernel
1) Run the build.sh script, remember to add sudo permissions
test@test:~/orangepi-build$ sudo ./build.sh
2) Select Kernel package, then press Enter
To Next Page
Loading...
